For facility energy managers and auditors, electricity is one of the largest controllable costs you have — and one lump-sum monthly bill tells you almost nothing about where it goes. You can't see how much was wasted by HVAC running in empty zones, how much heavy machinery drew, or which tenant should be billed for what. That blind spot leads to wasted budget and unmanaged peak-demand penalties.
Non-invasive current monitoring turns the lights on, circuit by circuit.
Meter consumption where it actually happens
To cut energy cost, you have to measure downstream of the main panel. MaxLinc pairs with non-invasive current transformers (CT clamps) that snap around individual breakers, lighting banks, HVAC chillers and large motors — no electrician rewiring required. Now you can see exactly which loads run during unoccupied hours and shut them down to cut the bill.
Catch demand spikes before they cost you
Utilities don't just charge for energy — they penalize you for peak demand. MaxLinc logs current draw continuously so you can see when your heaviest loads run and shift them off the expensive peak windows. Spotting a single avoidable demand spike can pay for the monitoring outright.
Predictive insight, not just billing
Current draw is also a health signal. A motor with worn bearings pulls more amps to do the same work; a pump that's cavitating swings erratically. By trending each circuit's draw against its baseline, MaxLinc flags equipment that's degrading — so an energy audit doubles as early failure detection. (More on that in our predictive maintenance guide.)
Turn compliance reports into one click
Corporate sustainability mandates and energy codes force you to compile detailed audits — a tedious, manual chore. MaxLinc records every load, baseline and peak-demand event automatically, then exports clean CSV or PDF reports on demand. You satisfy the reporting requirement with zero data entry.
Start monitoring
Pair MaxLinc current-clamp loggers with the cloud dashboard to map your building's real energy profile, or see how the same telemetry supports industrial automation monitoring. Stop paying for energy you can't see.